D-266 ANGLE CHECKERThe Model D-266 Angle Checker is designed to check a specific angle of a test part and determine if the angle being checked is within an acceptable tolerance.
The optional Model D-657 Tooling Autocollimator when used in conjunction with the Model D-266 can be positioned to check any angle throughout the angle checker's 120° scale and locked in position by means of a hand locking knob. The table of the angle checker has two adjustments providing table tilt in two planes for aligning a gage block or master reference part to the autocollimator.
The 120° scale provided for checking angles is graduated in one degree increments with every 5 degrees an extended line and every 10 degrees line numbered. From left to right the scale reads 30°, 20°, 10°, to 0°. With the Autocollimator bracket positioned at 0° on the scale, the Autocollimator line of sight is perpendicular (90°) to the work table surface. From the 0° position the scale continues to 90° where the Autocollimator line of sight is parallel to the work table surface.
As in all Davidson Optronics, Inc. instruments simplicity is designed into the Model D-266. Assembly line and non-technical personnel can master its use in seconds! |
Specifications:
| Table Adjustment Ranges: | Azimuth: | ±3° |
| Elevation: | ±4° | |
| Adjustment Range: | 120° | |
| Overall Dimensions: | Height: | 13.5 inch (343 mm) |
| Width: | 11.75 inch (299 mm) | |
| Depth: | 9 inch (229 mm) | |
| Finish: | Table: | Black hard anodized aluminum |
| Other Parts: | Ivory enamel | |
| Weight: | 17 lbs (7.7 kg) | |
| Shipping Weight: | 22 lbs (10 kg) | |
Optional Accessories:
D-657 Tooling Autocollimator
D-657-500 Tooling Autocollimator
|
|
|
D-266 Drawing |
|
