ANGLE CHECKER -- D-266The Model D-266 Angle Checker is designed to check a specific angle of a test part and determine if the angle being checked is within an acceptable tolerance.
The optional Model D-657 Tooling Autocollimator when used in conjunction with the Model D-266 can be positioned to check any angle throughout the angle checker's 120° scale and locked in position by means of a hand locking knob. The table of the angle checker has two adjustments providing table tilt in two planes for aligning a gage block or master reference part to the autocollimator. The 120° scale provided for checking angles is graduated in one degree increments with every 5 degrees an extended line and every 10 degrees line numbered. From left to right the scale reads 30°, 20°, 10°, to 0°. With the Autocollimator bracket positioned at 0° on the scale, the Autocollimator line of sight is perpendicular (90°) to the work table surface. From the 0° position the scale continues to 90° where the Autocollimator line of sight is parallel to the work table surface. As in all Davidson Optronics, Inc. instruments simplicity is designed into the Model D-266. Assembly line and non-technical personnel can master its use in seconds! |
Detailed Specifications:
| Table Adjustment Ranges | Azimuth | ±3° |
| Elevation | ±4° | |
| Adjustment Range | 120° | |
| Overall Dimensions | Height | 13½ Inch (343 mm) |
| Width | 11¾ Inch (299 mm) | |
| Depth | 9 Inch (229 mm) | |
| Finish | Table | Black Hard Anodized |
| Other Parts | Ivory Enamel | |
| Angle Checker Weight | 17 pounds (7.7 kg) | |
| Shipping Weight | 22 pounds (10 kg) | |
Davidson Optronics, Inc.
Phone: (626) 962-5181
Fax: (626) 962-5188
E-mail: sales@davidsonoptronics.com
